This actually involves the basic principle of the Foaming Pump Head . After the water and foam liquid is rapidly ejected, a certain negative pressure is generated around the liquid column. The negative pressure attracts the gas into the mixing part so that the gas and the liquid are mixed again to produce foam. Before this, foamed plastics were produced in the pulp in the flotation field, so the general pulp pump was not suitable for conveying this kind of foamed plastic pulp.
The foam pump can be very well integrated into the foam in the field of concentrators such as flotation according to the special product structure design.
The characteristics of the foam pump are that the pump impeller adopts a double pump body structure, and the overcurrent components are made of hard nickel, high chromium, or plastic. Depending on the conveyed material, the lining can be covered, and the pump outlet can be changed at a 45-degree interval. The pump can effectively remove the foam in the slurry. It still works normally, in the case of raw materials.