The foaming Pump Head includes a dispenser and a pump head. The dispenser is divided into two types: tie-on type and screw-on type. In terms of function, it is divided into spray, foundation cream, lotion pump, aerosol valve, and vacuum bottle. The size of the pump head is determined by the caliber of the matching bottle body. The spray size is 12.5mm-24mm, and the water output is 0.1ml/time-0.2ml/time. It is generally used in the packaging of perfumes, gel water, and other products, and the caliber is the same. The length of the bottle can be determined according to the height of the bottle.
The specification range of the lotion pump is 16ml to 38ml, and the water output is 0.28ml/time - 3.1ml/time. It is generally used for creams and washing products. Special dispensers such as foam pump head and hand button sprinkler head, the foam pump head is a kind of non-air-filled hand pressure pump head, which does not need to be filled with air to generate foam, and can produce quantitative high-quality foam only by pressing lightly. Usually comes with a dedicated bottle. Hand-on applicators are often used on products such as cleaners.
The composition of the distributor is relatively complex, generally including dust cover, pressing head, pressing rod, gasket, piston, spring, valve, bottle cap, pump body, straw, valve ball (steel ball, glass ball). Bottle caps and dust caps can be colored, electroplated, or covered with anodized aluminum rings. Since a set of pump heads involves many molds and the order quantity is large, the minimum order quantity is 10,000-20,000, and the delivery period is 15-20 days after the sample is confirmed. White and general-purpose types are often in stock.